Metal Roofing in Austin & Central Texas
A metal roof built for Texas heat and hail, installed by specialists and backed by our 25-year workmanship warranty.
Metal Roofing Contractor · Austin, Round Rock & San Antonio
Metal Roofs Built for Texas Weather and the Long Term
Metal roofing in Austin is our specialty. For owners who plan to stay put, a well-installed metal roof can outlast several shingle roofs, stand up to Texas heat and wind, and give a home or building clean, lasting curb appeal. We install standing seam, exposed-fastener, metal tile and stone-coated steel roofs on homes and commercial buildings from Georgetown to San Antonio, and we back every metal roof with a 25-year workmanship warranty.
25-Year Warranty
Workmanship on every metal roof.
Round Rock & San Antonio
Offices in both cities.
Local and accountable.
Fully Insured
Protection for your property.
QUICK FACTS
Metal Roofing at a Glance
The short version, before the details below.
Is a Metal Roof Right for Your Property?
Metal is a long-term investment. It costs more upfront than asphalt shingles, so the value comes from how long it lasts and how little it asks of you.
Metal is often a strong fit if you:
- Plan to own your home or building for many years
- Want a roof that stands up to Central Texas heat, wind, and hail
- Like a clean, architectural look, from modern farmhouse to Hill Country stone
- Are tired of repairing or replacing shingle roofs
- Live where wildfire embers are a concern, west of Austin
Another material may make more sense if you:
- Plan to sell soon and need the lowest upfront cost
- Have HOA rules that restrict metal (check first)
- Want the authentic look of clay tile or natural slate
- Only need a repair on a roof with years left
Prefer a traditional look? See tile roofing, slate roofing, or synthetic slate and shake.
Metal Roofing Systems We Install
Metal roofing isn’t one product. The panel, how it’s fastened and what it’s made of decide how the roof looks, how it handles weather and what it costs.
Standing Seam Metal
Panels run eave to ridge with the fasteners hidden under raised seams. Our most-requested system for high-end Austin homes: clean lines, few places for water to get in, and decades of life.
Exposed-Fastener Panels
Ribbed or corrugated panels screwed through to the deck or purlins, with a sealing washer under each screw. They cost less than standing seam and install faster, and we put them on homes, barns, shops, patio covers and commercial buildings. The trade-off is upkeep: the screws and washers sit in the sun and need checking over the years.
Metal Tile
The look of classic clay tile with far less weight and no breakage. We installed Worthouse metal tile on Giovanni’s Italian Restaurant in San Antonio.
Stone-Coated Steel and Metal Shingles
Steel panels shaped and finished to look like shingles, shake, slate or tile, for homes and neighborhoods that want a traditional look with metal underneath. We install stone-coated systems from DECRA and Novatik.
Aluminum, Copper and Zinc
Specialty metals for whole roofs, porches, bay windows and architectural accents. Each one moves with heat and weathers differently, so we’ll talk through where each fits your design and budget.
Custom Sheet Metal
Chimney covers, crickets, valleys, and trim fabricated to fit, so the most leak-prone details on a metal roof are built to last as long as the panels.
| Standing seam | Exposed-fastener | Metal tile & stone-coated | |
|---|---|---|---|
| Look | Clean vertical lines, flat panels | Ribbed or corrugated, rustic to modern | Tile, shake, slate or shingle profiles |
| Fasteners | Hidden under the seams | Screws through the panel face | Varies by product |
| Best fit | Homes, modern and Hill Country styles, commercial | Homes, barns, shops, patios, commercial | Traditional and Mediterranean styles, HOA neighborhoods |
| Upkeep | Low | Check screws and washers over time | Low |
| Relative cost | Highest | Lowest | Moderate to high |
Want the details on seam types, clips and panel profiles? Read our standing seam metal roofing guide →
How Metal Roofs Perform in Central Texas
Our climate is hard on roofs. Here’s how metal holds up to it.
Summer Heat
Light and cool-rated painted finishes reflect much of the sun's heat and release what they absorb, helping keep attics cooler. Bare, unpainted metal reflects well but sheds heat poorly, so the finish matters as much as the metal.
Hail
Metal won't crack or shed granules. Large hail can dent panels, and those dents are often cosmetic. Some panels carry a UL 2218 Class 4 impact rating; it depends on the product.
Wind
Wind resistance comes from the panel, the deck and the fastening pattern. We follow the manufacturer's attachment schedule, with tighter spacing at edges and corners where uplift is strongest.
Wildfire Embers
Metal is noncombustible, a real advantage in the Hill Country west of Austin and around Dripping Springs. Fire ratings apply to the whole roof assembly, so we match the underlayment and deck to it.
Rain and Noise
Over a solid deck with underlayment, a metal roof is typically no louder inside than shingles.
Lifespan
A well-installed metal roof can last for decades. How long depends on the panel, its coating, the fasteners and basic upkeep.
What Goes Into a Quality Metal Roof
A metal roof is only as good as its details. Two roofs with the same panels can perform very differently depending on how these are handled.
The Deck
We check the roof deck before anything goes on it and replace soft or damaged sections. Panels need a flat, solid base.
Underlayment
Texas roofs get hot, so we use underlayment rated for the metal system and the heat, laid to shed any water that gets under the panels.
Room to Move
Metal expands in the afternoon sun and contracts at night. Standing seam clips let panels move without working fasteners loose; exposed-fastener panels need the right screws and spacing.
Flashing and Transitions
Walls, chimneys, valleys and roof-to-roof transitions are where leaks start. We build them from matching sheet metal, including crickets behind chimneys.
Penetrations
Vents, pipes and skylights get flashing made for metal roofs, sealed and finished to match the panels.
Pitch and Drainage
Every system has a minimum roof slope. Low-slope sections may need a different panel or a membrane roof, and we'll tell you when they do.
Choosing a Color and Finish
Color affects more than looks on a Texas roof. Lighter and cool-rated finishes stay cooler in summer, while charcoal and bronze suit stone, modern and farmhouse homes.
Finish and Fade
The paint system matters as much as the color. Premium finishes resist fading and chalking longer and usually carry their own finish warranty from the manufacturer. We’ll show you each finish’s warranty and reflectance rating before you choose.
Samples, Not Screens
Screens and printed color charts aren’t exact. We bring physical samples to hold against your stone, brick and trim in daylight. If you have an HOA, we’ll give you product sheets and samples for the review.
What a Metal Roof Costs in Austin
Every metal roof is priced to the home. These are the factors that move the number most.
Size and Pitch
More area and steeper slopes take more material, labor, and safety setup.
Roof Complexity
Valleys, dormers, skylights, and chimneys each need custom trim and flashing.
Metal System
Standing seam, exposed-fastener, metal tile and stone-coated steel differ in material cost and installation time.
Gauge and Finish
Heavier gauges and premium paint finishes cost more and last longer.
Tear-Off and Deck
Removing the old roof and replacing damaged decking adds to the scope.
Financing
Monthly payment options are available through our lending partner.
Metal Roof vs. Shingles in Central Texas
The two most common choices for Austin-area homes, compared honestly.
Metal Roofing
Higher upfront cost, a much longer expected life, very little maintenance, strong wind and fire performance, and a clean, architectural look. Usually the better value if you’ll stay in the home.
Asphalt Shingles
Lower upfront cost and a traditional look that fits nearly any home. Shingles age faster in Texas heat and can lose granules in hail, so expect to replace them sooner.
Metal Roofing for Homes and Commercial Buildings
The right metal roof depends on the building. Here’s how we approach each.
Homes
For homeowners, the decision usually comes down to look, how long you’ll own the home and the condition of the current roof. We help you pick a system and color that suit the architecture, and we inspect the deck and ventilation so the new roof starts on a sound base.
Commercial Buildings
Commercial metal roofs are driven by drainage, wind design, rooftop equipment and keeping the business open during the work. In Burnet, we replaced a leaking tar-and-gravel section with standing seam metal. At Giovanni’s in San Antonio, metal tile went on the sloped roofs and PVC on the flat roof. When membrane is the better fit for a low-slope roof, we’ll say so.
How We Install a Metal Roof
A metal roof is only as good as its installation. Here’s how every project runs.
01
Assess the Roof
We inspect the roofing, deck, flashing, ventilation, and every penetration, and ask what you want from your next roof. Here’s what a metal roof inspection covers.
02
Recommend Honestly
We explain which metal systems fit your property and budget, including when metal isn’t the right call. You choose the panel, finish and color from real samples.
03
Protect Your Property
On residential tear-offs, our Catch-All netting keeps old roofing and nails out of your yard.
04
Install the Details
Deck repairs, underlayment, panels, trim and flashing, with custom sheet metal at chimneys, walls and valleys.
05
Walk It and Warranty It
We clean up, walk the roof with you, and back it with our 25-year workmanship warranty.
Metal Roofs We've Installed
Charcoal Standing Seam, Austin
A shingle-to-metal replacement on a single-story home, with a custom metal cricket behind the stone chimney.
Galvalume Standing Seam, Dripping Springs
Bright Galvalume panels across the main house, dormer, and garage of a Hill Country limestone home.
Worthouse Metal Tile, San Antonio
Metal tile that keeps Giovanni’s Italian Restaurant’s terracotta look, plus a white Versico flat roof.
Commercial Standing Seam, Burnet
A leaking tar-and-gravel section converted to standing seam metal, with new trim at the ridge and parapet, after the owner’s claim was reopened and paid.
See all of our completed roofing projects, from commercial metal to Hill Country standing seam.
Warranties and Manufacturers
Every metal roof we install has two layers of coverage, and you’ll get both in writing before you sign.
Our 25-Year Workmanship Warranty
Covers our installation of your metal roof for 25 years, on top of the manufacturer’s warranty. Storm and hail damage aren’t warranty issues; that’s an insurance claim, and we can help with it.
Manufacturers We Install
We install metal roofing from Berridge, DECRA, Novatik and Worthouse, including the Worthouse metal tile on Giovanni’s Italian Restaurant. Panel and finish warranties come from the manufacturer, and their length and terms depend on the product.
Service Area
Metal Roofing Across Austin, the Hill Country, and San Antonio
We install metal roofs on stone homes in the Hill Country west of Austin, where embers and oak debris make metal a natural fit, on newer homes in Round Rock, Georgetown, and Cedar Park that want a roof they’ll never replace again, and on homes and businesses around San Antonio from our office there. Learn more about roofing in Austin, Round Rock, San Antonio, and Dripping Springs.
Austin · Round Rock · Georgetown · Cedar Park · Leander · Pflugerville · Hutto · Lakeway · Bee Cave · Dripping Springs · Buda · Kyle · San Marcos · New Braunfels · Burnet · Boerne · San Antonio
What Customers Say After the Work Is Done
Free Estimate
Price Out a Metal Roof
Tell us about your property. We’ll measure the roof, walk you through panel and color options, and give you a clear written price.
- Free, no-obligation estimate
- Standing seam, exposed-fastener, metal tile and stone-coated options
- A clear written price
- Questions? Call 512-271-6893
"*" indicates required fields
Metal Roofing in Austin: Common Questions
What types of metal roofing do you install?
Standing seam, exposed-fastener panels, metal tile, stone-coated steel and specialty metals like aluminum, copper and zinc, plus the custom sheet metal that ties them together. We’ll recommend the system that fits your property, budget and style.
What's the difference between standing seam and exposed-fastener metal?
Standing seam hides its fasteners under raised seams and lets panels move with temperature changes. Exposed-fastener panels are screwed through the face, cost less and install faster, but the screws and washers need checking over time. See our standing seam metal roofing guide for the details.
How much does a metal roof cost in Austin?
It depends on the size and pitch of the roof, the metal system (standing seam, exposed-fastener, metal tile or stone-coated steel), panel gauge and finish, and details like chimneys, valleys and skylights. Metal costs more upfront than shingles but usually lasts much longer. We measure your roof and give you a written estimate for free, and financing is available.
How long does a metal roof last in Central Texas?
A well-installed metal roof can last for decades. The panel, its coating, the fasteners and basic upkeep all play a part. We back every metal roof we install with a 25-year workmanship warranty, on top of the manufacturer’s warranty.
Will hail damage a metal roof?
Metal won’t crack or shed granules the way shingles do. Very large hail can dent panels, and many policies treat dents that don’t affect performance as cosmetic, so read your policy. Some panels carry a UL 2218 Class 4 impact rating, the highest in that test. If hail resistance is a priority, we’ll show you products tested for it, and we can complete the TDI impact-resistant roofing form your insurer may ask for.
Is a metal roof loud when it rains?
Not over a solid deck. Residential metal roofs are installed over decking and underlayment, which dampen the sound. The tin-roof noise people imagine comes from metal fastened over open framing, like a barn.
Does a metal roof attract lightning?
No. The National Weather Service says metal doesn’t attract lightning; height, shape and isolation decide where it strikes. Metal is also noncombustible.
Can a metal roof go over my existing shingles?
In some cases, where code allows it. We usually recommend a tear-off, because it lets us inspect and repair the roof deck before the new metal goes on. That’s the better long-term roof.
Can my HOA stop me from installing a metal roof?
Often it can regulate it. Texas law protects certain impact-resistant and energy-efficient shingles when they resemble shingles already allowed in the neighborhood, but that protection doesn’t clearly extend to metal panels. Check your HOA rules and submit for approval. We’ll provide product sheets and samples for the review.
Do metal roofs need maintenance?
Less than most roofs, but not none. Keep valleys and gutters clear, have penetrations and sealants checked every few years and after big storms, and on exposed-fastener roofs, have the screws and washers checked. We also repair metal roofs we didn’t install; see roof repair.
Related Services and Guides
Ready to Talk About a Metal Roof?
We’ll assess your roof, explain what we recommend and why, and give you a clear estimate, with no pressure.












