Custom Sheet Metal & Flashing in Austin, TX
Chimney covers, crickets, flashing and trim fabricated to fit your roof and stop leaks for good.
Custom Flashing & Sheet Metal - Austin & Central Texas
Custom Metal Details That Keep Water Out
The most leak-prone parts of any roof are the transitions: around chimneys, along walls, in valleys, and at every edge. Off-the-shelf pieces rarely fit those spots well. Custom sheet metal in Austin, built for your roof, does. We fabricate and install chimney covers, crickets, flashing, and trim to the exact shape of your roof. It’s detail work, and it’s often the difference between a roof that lasts and one that leaks.
BBB Accredited
Local and accountable.
TAMKO Pro Platinum
Manufacturer-certified.
Fully Insured
Protection for your property.
Free Inspections
No cost, no pressure.
Custom Sheet Metal We Build
Chimney Covers and Caps
Custom covers that shed water and keep animals and debris out, with optional spark arrestors.
Chimney Crickets
A peaked diverter behind the chimney that sends water around it instead of into it.
Step and Counter Flashing
Two-part flashing where roofs meet walls and chimneys, set to keep water out.
Valley Flashing
Metal valleys sized for the heavy water flow of Central Texas downpours.
Drip Edge and Trim
Clean edges that direct water into the gutters, not behind the fascia.
Custom Trim
Matching trim for metal roofs, dormers, patio covers, and one-off details.
Why Custom Beats Off-the-Shelf
A precise fit
Every chimney, wall, and dormer is a little different. Custom pieces are made to the actual dimensions, not the closest standard size.
Fewer weak points
A better fit means fewer seams and less reliance on sealant, which breaks down quickly in Texas sun.
A finished look
Custom metal can match your roof’s color and finish, especially important on standing seam roofs.
How We Build Custom Sheet Metal
Measured, fabricated, and installed to fit.
01
Inspect the Area
We find where water is getting in at the chimney, wall, or detail.
02
Measure Precisely
We take exact measurements of the area the metal needs to fit.
03
Fabricate to Fit
The piece is made to those measurements and your roof’s finish.
04
Install and Seal
We integrate it with the surrounding roofing so it sheds water.
05
Check the Work
We confirm everything is secure and clean up before we leave.
Custom Sheet Metal in Our Projects
Custom Chimney Cover, Dripping Springs
A custom chimney cover with a screened spark arrestor, flashed into a new Galvalume standing seam roof.
Chimney Cricket, Austin
A metal cricket built behind a stone chimney to divert water around it on a new charcoal standing seam roof.
Patio Roof Flashing, Helotes
A new metal patio roof with galvanized flashing tied cleanly into the main shingle roof.
Service Area
Custom Flashing and Sheet Metal Across Central Texas
Stone chimneys in the Hill Country, brick chimneys in older Austin neighborhoods, and patio additions all over Round Rock and San Antonio share the same weak point: the joint between the roof and everything that pokes through it. We fabricate metal for those joints across the region. Learn more about roofing in Austin, Round Rock, San Antonio, and Dripping Springs.
Austin · Round Rock · Georgetown · Cedar Park · Leander · Pflugerville · Hutto · Lakeway · Bee Cave · Dripping Springs · Buda · Kyle · San Marcos · New Braunfels · Boerne · San Antonio
What Customers Say After the Work Is Done
Free Estimate
Have a Detail That Keeps Leaking?
Tell us what’s going on. We’ll find where the water gets in and quote a custom solution.
- Free inspection and estimate
- Photos of the problem
- Metal matched to your roof
- Questions? Call 512-271-6893
"*" indicates required fields
Custom Sheet Metal in Austin: Common Questions
Why is my chimney leaking?
Most chimney leaks come from failed flashing, a missing cricket, or a damaged cap or cover, not the masonry itself. An inspection shows exactly where the water is getting in.
What is a chimney cricket, and do I need one?
A cricket is a small, peaked diverter built on the uphill side of a chimney that splits water and sends it around both sides. Building codes generally require one on chimneys wider than 30 inches, and it’s smart on smaller ones too.
What's the difference between step flashing and counter flashing?
Step flashing is woven in with the roofing where a roof meets a wall or chimney. Counter flashing covers the top of the step flashing and is set into the masonry or siding, so water can’t get behind it. A leak-free wall or chimney needs both.
Can custom metal match my roof?
Yes. We can fabricate pieces in a color and finish that match your roof, which matters most on metal roofs and visible details like chimney covers.
Can you add custom flashing without replacing my roof?
Often, yes. Many flashing and chimney fixes can be done as part of a roof repair.
Do you build chimney covers with spark arrestors?
Yes. We fabricate custom chimney covers with screened spark arrestors, like the one on our Dripping Springs project, a good choice where wildfire risk is a concern.
At Giovanni’s Italian Restaurant in San Antonio, we capped the parapet walls with new metal coping and installed custom 6-inch commercial gutters. See all of our completed roofing projects.
Let's Fix It at the Source
We’ll find where the water is getting in and build a custom solution that fits.




